Stock Scanner Settings for Day Trading: The Filters That Find Setups
Scanners ship with hundreds of filters, and five do all the work. The core settings with small-cap vs large-cap thresholds, one-scan-per-setup presets, and a November Tuesday where 412 names shrank to a single A-grade candidate — with the reason every one of the other 411 got refused.

By XeanVI Team · Published 2026-11-14
Every scanner ships with hundreds of filters, which is precisely the problem. Ask what stock scanner settings actually matter for day trading and the honest answer is five, maybe six, with everything else contributing noise disguised as sophistication. A scan isn't a search for good stocks; it's a machine for shrinking 8,000 tickers down to the two to six that deserve attention in the next hour, and the settings are the machine's moving parts. This guide covers the core settings with real thresholds, how they shift by setup type, the configuration mistakes that quietly ruin scans, and how to turn a filter list into something you run the same way every morning.
What are the best stock scanner settings for day trading?
Five settings do almost all the work: a price band matched to your account and playbook, relative volume (RVOL) above 3x to confirm attention, a change or gap filter of 5 to 10 percent to catch stocks already moving, a float filter when you're hunting outsized momentum, and a dollar-volume floor so the liquidity is real rather than painted. Each one removes a different kind of junk. Price banding removes stocks you can't size properly, RVOL removes stocks nobody cares about today, the move filter removes stocks going nowhere, float isolates supply-constrained names, and dollar volume removes illusions where a big share count hides a thin book. Notice there's no RSI, MACD, or analyst rating in the list; intraday momentum is a supply, demand, and attention game, and these five measure exactly that.
| Setting | What it measures | Small-cap momentum | Large-cap momentum |
|---|---|---|---|
| Price band | Tradability for your account size | $2 – $10 | $20 – $500 |
| Relative volume | Attention vs. the stock's own normal | 3x – 5x+ | 2x+ |
| Gap / change % | A move already underway | ±10%+ | ±3 – 5% |
| Float | Tradable supply | Under 20M shares | Usually omitted |
| Dollar volume | Real money changing hands | $2M+ premarket / $10M+ intraday | $50M+ |
The sub-$5 slice of this table carries extra rules about spreads, dilution, and promotion, covered in the penny stock scanner setup, and the float column's logic is unpacked in how to find low float stocks.
How do scanner settings change by setup?
The five core settings are the chassis; the setup you trade decides the tuning. A gap-and-go scan leans hard on the premarket gap and premarket volume because the whole setup is an overnight catalyst resolving at the open. An opening range breakout scan can relax the gap filter but tightens the time window, since ORB only exists in the first hour. A VWAP pullback scan flips the logic from "what's exploding" to "what's trending above the line on volume and just touched it." The mistake is running one generic scan for all three, which produces candidates that half-fit everything and fully fit nothing. One scan per setup, each with its own saved settings, is the configuration that matches how playbooks actually work.
| Setup | Keep tight | Can relax | When to run |
|---|---|---|---|
| Gap-and-go | Gap %, premarket volume, catalyst check | Intraday change | 7:00 – 9:25, per the premarket routine |
| Opening range breakout | RVOL, time window (first hour) | Gap size | 9:45 – 10:30 |
| VWAP pullback | Trend state, volume on the touch | Gap %, float | 10:00 – 11:30 |
| Afternoon breakout | Dollar volume, range tightness | RVOL (resets midday) | 2:00 – 3:30, exits planned before close |
Why do most scanner configurations fail?
Three ways, and loosening is the most common. A trader starts with sane thresholds, hits a slow Tuesday where the scan returns nothing, and widens the filters until candidates appear, which defeats the entire purpose: an empty scan on a dead morning is the scan working. The second failure is filter stacking, piling on indicator conditions until the scan returns a different random handful each day and nothing can be learned from any of them. The third is ignoring data staleness, because float figures lag offerings and free scanners run delayed quotes, so the settings are only as honest as the feed underneath them. Scanner output is a candidate list, not a buy list, and FINRA's day trading guidance is blunt about what happens to traders who treat every blinking row as an entry.
An empty scan is information. A loosened scan is noise you ordered.
A Tuesday in early November, tightened step by step
Watch the machine shrink the market. Premarket on a routine Tuesday, a bare price filter ($2 to $10) returns 412 names. Add RVOL over 3x: 31 remain. Add gap over 10 percent: 9. Add dollar volume over $2M premarket: 5. Add a findable catalyst, checked by hand: 3 candidates, of which one fails the spread check and one has a fresh shelf registration in its filings, leaving a single A-grade name and two watchlist entries by 9:25. That's the entire job done well: not finding more stocks, but refusing 409 of them for stated reasons you could audit afterward.
How do you make the scan repeatable?
Write the settings into the playbook, run them on a schedule, and log what came back. The settings belong next to the entry and stop rules in your written playbook, with numbers, so "the scan" means the same thing on a confident Monday and a tilted Thursday. Run it at fixed times rather than compulsively, since rescanning every four minutes manufactures candidates out of boredom. And keep a log of every name it surfaced with what happened next, because the same tickers rotate back for weeks, and the log turns your scanner into a watchlist that builds itself. Consistency is the point: a scan you tweak daily can't be evaluated, and a scan you can't evaluate can't improve.
Where automation takes over
Everything above is schedulable logic, which is why it automates cleanly. XeanVI runs its scans on a fixed schedule through the session, applies the configured filters identically every pass, validates each candidate gate by gate against your playbook rules including the catalyst check, and either routes a bracket order sized off your risk limit to your own Alpaca account under hard loss caps, or logs exactly why it declined. The scan, the skip reasons, and the audit log are the same system, and free paper mode runs the identical pipeline while you're still tuning thresholds.
Key takeaways
Stock scanner settings come down to five filters doing real work: price band, relative volume, gap or change percent, float where momentum is the goal, and a dollar-volume floor, tuned per setup rather than averaged into one generic scan. Resist loosening on quiet days, cap the filter count, verify float against filings, and treat every result as a candidate owed a catalyst, spread, and chart check before any order. None of this is financial advice, scanners find movement rather than profits, and most day traders lose money; trading involves real risk of loss, and new settings belong in paper trading first. The market is 8,000 stocks every morning. The settings are how you earn the right to ignore 7,995 of them.